24' Wood Roof Truss Framing Cost

Construction Item Description

Construction framing unit cost for prefab wood roof trusses with approximately a 24 foot span.

This price includes unloading and installation of the roof trusses and installation of blocking between the trusses.

Unit Size

One square foot of roof area.

Labor Costs

We figure that a two-person crew can install trusses on about 22 square feet of roof area, per hour.

NOTE-- The labor and material quantities are adjusted by the roof spacing listed on the Structural Dimensions screen-- for 12" spacing the cost is doubled, and for 16" spacing it is multiplied by 150%.

Material Costs

One truss for every 48 square feet of roof area, with a 4% waste factor.

NOTE-- This coverage rate assumes use of separate gable end trusses or regular wall framing at the two ends (not included in this unit cost). Theoretically most projects should require one less truss than the actual area, but frequently the spacing isn't even or there is some other reason to get an additional truss.

Suggested Quantity

Roof framing area from the Roof Dimensions screen.

Source of Construction Pricing

Based on actual crew timing from a couple of projects.

NOTE-- We were primarily remodelers who didn't often install truss roofs. For new construction you can probably reduce this unit cost considerably, particularly if you use a crane for installation.

Places Included

Architect Starter File, Construction Starter File, Developer Starter File, Framing Starter File.

Comments

Click here for more about Goldenseal construction estimating software.

Click here for other framing estimating costs.